An attempt to build a docker image fails on RUN pip install -r requirements.txt
step with the following error:
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'ReadTimeoutError("HTTPSConnectionPool(host='pypi.org', port=443): Read timed out. (read timeout=15)")': /simple/asgiref/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'ReadTimeoutError("HTTPSConnectionPool(host='pypi.org', port=443): Read timed out. (read timeout=15)")': /simple/asgiref/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'ReadTimeoutError("HTTPSConnectionPool(host='pypi.org', port=443): Read timed out. (read timeout=15)")': /simple/asgiref/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'ReadTimeoutError("HTTPSConnectionPool(host='pypi.org', port=443): Read timed out. (read timeout=15)")': /simple/asgiref/`
for some reason, asgiref==3.5.2
doesn’t want to install. What could be the reason for this?
System used:
- OS: Windows 11
- WSL 2 with Ubuntu 22.04 on board
- Docker version 20.10.19, build d85ef84
- Dockerfile contents:
# Pull base image
FROM python:3.10.6-slim-bullseye
# Set enviroment variables
ENV PIP_DISABLE_PIP_VERSION_CHECK 1
ENV PYTHONDONTWRITEBYTECODE 1
ENV PYTHONUNBUFFERED 1
# Set work directory
WORKDIR /code
# Install dependencies
COPY ./requirements.txt .
RUN pip install -r requirements.txt
# Copy project
COPY . .
- requirements.txt contents:
asgiref==3.5.2
Django==4.1.2
sqlparse==0.4.3
2
Answers
Seems like the main issue was that I installed docker right from my WSL2 ubuntu distro using instructions for Linux and not with the help of official Windows installer, which seamlessly integrates with WSL2. Reinstalled and now network works as intended. Thanks everyone!
I had this problem today. So, you can fix this issue with a
--network host
in your Docker build line.The reason for this is issue is an MTU mismatch of your network interfaces. If you open the base image from your Dockerfile in interactive mode:
sudo docker run -it {your base image repo} /bin/bash
, and runip a
, then do the same on your host OS, you will probably find that they are different. This means that the Docker bridge is dropping packets / failing transmission. If you want bridge networking to work as opposed to host, create a file on your host OS at/etc/docker/daemon.json
with the contentsand then run
sudo systemctl restart docker
, this should probably fix your bridge networking.EDIT: I should add that this is only the case (most likely) if you have internet connectivity from your container (i.e. apt/yum works but something else like pip breaks). If you cannot pull anything, you probably have a DNS/firewall issue.